Evco EPV4CBR Hardware manual Manual do Utilizador descarregar pdf (Página 11)

EVCO S.p.A. Vcolor | Hardware manual ver. 1.0 | Code 144VCOE104

page 11 of 38

3.4 Plugging-in the line termination of the CAN network with CANBUS

communication protocol

To reduce the reflections on the signal transmitted along the cables connecting the devices to a CAN network with CANBUS

communication protocol it is necessary to plug-in the line termination of the first and of the last element of the network.

To plug-in the line termination, position micro switch 2 on position ON.

The micro switch is located at the back of the devices.

3.5 Polarizing the RS-485 network with MODBUS communication protocol

The devices are not able to polarize a RS-485 network with MOSBUS communication protocol; it is necessary the network is polarized

by another element.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Sem comentários

Evco EPV4CBR Hardware manual Manual do Utilizador Página 11