Evco EC6190 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Evco EC6190. EVCO EC6190 User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 4
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
Every Control S.r.l. • EC 6-190 • Sheet 1/2
1 PREPARATIONS
1.1 How to install the instrument
On DIN rail (it is not supplied by the builder).
DIN rail installation (it is not supplied by the builder).
smart guide
EC
6-190
ON-OFF digital controller for ventilated re-
frigerating units
Version 1.00 of May the fourth, 2002
File ec6190e_v1.00.pdf
PT
EVERY CONTROL S.r.l.
This Company belongs to
Via Mezzaterra 6, 32036 Sedico Belluno ITALY
Phone 0039-0437-852468 • Fax 0039-0437-83648
[email protected] • www.everycontrol.it
1.2 Electrical connection
2 OPERATION
2.1 Preliminary information
During the normal operation the instrument shows the cabinet
temperature.
2.2 How to silence the buzzer
If you have to silence the buzzer:
• press
2.3 How to activate the defrost by hand
If you have to activate the defrost by hand:
• press
for 4 s
Unless the evaporator temperature is below the defrost end tem-
perature you have set with the parameter d2, the defrost will
not be activated.
3 WORKING SETPOINT
3.1 How to set the working setpoint
If you have to modify the working setpoint value:
• press
and or
(1)
ENGLISH
Vista de página 0
1 2 3 4

Resumo do Conteúdo

Página 1

Every Control S.r.l. • EC 6-190 • Sheet 1/21 PREPARATIONS1.1 How to install the instrumentOn DIN rail (it is not supplied by the builder).DIN rail ins

Página 2

6 ALARMS6.1 AlarmsMEANINGCompressor LEDif it is lighted, the compressor will be ONif it flashes, a compressor delay will be running (look at the param

Página 3

Every Control S.r.l. • EC 6-190 • Sheet 2/2The instrument shows the indications above flashing and the buzzer utters an intermit-tent beep.7 TECHNICAL

Página 4

8 WORKING SETPOINT AND CONFIGURATION PARAMETERS8.1 Working setpointLABEL MIN. MAX. U.M. DEF. WORKING SETPOINTr1 r2 °C 2 working setpoint8.2 First leve

Comentários a estes Manuais

Sem comentários