Evco EVF328J9 Manual do Utilizador descarregar pdf (Página 10)

EVCO S.p.A. EVF 300 series | Installer manual ver. 1.1 | Code 144F300E114

Page 10 of 62

3 ELECTRIC CONNECTION

3.1 Electric connection

The following drawing illustrates the devices' electric connection.

The utility managed by the K4 digital output, depends on the configuration parameter u1, as follows:

- extraction hood (parameter u1 = 0, factory setting)

- multifunction (u1 = 1).

The utility managed by the K5 digital output, depends on the configuration parameter u11, as follows:

- technical compartment fan (parameter u11 = 0, factory setting)

- switch-on/off (u11 = 1).

For the settings relative to the configuration parameters, see chapter 14 “CONFIGURATION”.

The TTL port is the communication port with the EVKEY programming key.

The RS-485 port is the communication port with the following EVCO products:

- parameters Manager set-up software system

- device for recording data and to download recorded data (via USB) EVUSBREC01.

- RICS plants monitoring and surveillance systems

The port must not be used simultaneously with more than one of these products.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 61 62

Sem comentários

Evco EVF328J9 Manual do Utilizador Página 10